All ProductsNinjaTrader 7 Add-onsNinjaTrader 8 Add-onsFree ToolsUtilities

Wednesday, November 14, 2018 Orderflow Bars for NT8 was updated (build 2.0.1.6):

Sunday, November 11, 2018 Range Volume Profile for NT8 was updated (build 1.0.4.6)
• Added 'Naked Levels Cutoff Mode' parameter with two available options — "Whole Bar Range" (default) and "Candlestick Body". You can switch the options on-the-fly in the [*] tab of RVP Control Panel.

Wednesday, November 7, 2018 Tracking for NT8 was updated (build 1.0.0.2)
• Added 'Toolbar Button Active Color' parameter as previous highlighting of the toolbar button in active tracking mode is not clearly seen in Dark Themes of NinjaTrader's UI.

Sunday, November 4, 2018 Range Volume Profile for NT8 was updated (build 1.0.4.5)
• Added 'Positive Delta Outline Color' and 'Negative Delta Outline Color' parameters in the 'Volume Profile' and 'Tick Profile' Appearance Settings.

Thursday, November 1, 2018 Range Volume Profile for NT8 was updated (build 1.0.4.4)
• Added 'Overall Opacity' parameter to Composite Profile settings with related slider in the 'Composite' tab of RVP Control Panel.
• Added 'Delta Histograms Opacity' parameter to Periodic Profiles (PPs), Composite Profile and Range Profiles settings with related sliders in the 'Periodic', 'Composite' and 'Custom Range' tabs of RVP Control Panel.

Tuesday, October 30, 2018 Range Volume Profile for NT8 was updated (build 1.0.4.3)
• Added the 'Max Num Of Periodic Profiles' parameter (see '2. Periodic Profiles (PPs)' settings section) to limit the number of periodic profiles to create on start up. The parameter is set to 0 by default which means no limit. The limitation may only be helpful when working with very tremendous number of periodic profiles (for example, when periodicity is set to "Per Bar"...). In other cases there is no need to limit the number of PPs as the rendering mechanism is already quite optimized in RVP.
• Added the 'Fade Delta Histogram Bars' option to 'Volume Profile' and 'Tick Profile' Appearance Settings. The option is only intended for the bars of separate Delta Histogram.

Monday, October 29, 2018 Reconstructed Tape for NT7 was updated (build 2.1.0.12):
• The "In Between" and "Less Than Or Equal" options of Filtering By Size are now completely supported in the Basic and Hybrid Reconstruction Modes in addition to the Raw Mode. A post-processing mechanism removes a print if the corresponding trade size aren't fit the Filter criteria anymore.

Monday, October 29, 2018 Reconstructed Tape for NT8 was updated (build 2.0.0.12):
• The "In Between" and "Less Than Or Equal" options of Filtering By Size are now completely supported in the Basic and Hybrid Reconstruction Modes in addition to the Raw Mode. A post-processing mechanism removes a print if the corresponding trade size aren't fit the Filter criteria anymore.

Tuesday, October 23, 2018 Orderflow Bars for NT8 was updated (build 2.0.1.5):
OfB - C/B Marks - Row-To-Row Tendency Metric • Added 'Row-To-Row Tendency Metric' parameter in the Capping/Boosting Marks settings with three available options: Row Delta (default), Diagonal Imbalance, Bid (in Downtrend) | Ask (in Uptrend). The added flexibility allows a trader to choose better option for a particular traded instrument (futures contract, stock, etc).
• Other fixes of the Capping/Boosting Bars detection logic.

Sunday, October 21, 2018 Orderflow Bars for NT8 was updated (build 2.0.1.4):
Minor updates: • Changed appearance of Capping/Boosting Marks. • Added tooltips to the new controls of OfB Control Panel.

Saturday, October 20, 2018 Orderflow Bars for NT8 was updated (build 2.0.1.3):
• Added UI elements to the OfB Control Panel to easily adjust the condition parameters of Capping/Boosting Marks. It is required to click 'Apply' button to re-scan and detect 'Capping' and 'Boosting' bars for new conditions.

Thursday, October 18, 2018 Orderflow Bars for NT8 was updated (build 2.0.1.2):
Technical update for testers.
• Improved the algorithm of 'Capping' and 'Boosting' bars detection. Real-time detection of the 'Capping' and 'Boosting' bars is enabled in this version.

Sunday, October 14, 2018 Orderflow Bars for NT8 was updated (build 2.0.1.1):
Technical update for testers.
• Added marking of 'Capping' and 'Boosting' bars with customizable conditions. (Detection of the 'Capping' and 'Boosting' bars is enabled for historical bars only in this version.)

Sunday, October 7, 2018 Range Volume Profile for NT8 has been updated (build 1.0.4.2)
RVP NT8 - Summary Info Options
• Added options of Summary Info block to choose which information to print.
• Added 'Pseudo-Delta' mode. If the 'Data Source' option is set to "Minute Series" then Delta is calculated on the historical data with 1-minute granularity as [Volume of 1-min Bullish bars] minus [Volume of 1-min Bearish bars]. (This is a Pseudo-Delta. Switch the 'Data Source' to other than "Minute Series" option to get fair tick-based Delta).

Wednesday, September 26, 2018 Orderflow Bars for NT8 was updated (build 2.0.0.5):
• Minor update: added extra options for Simplified Look.
Changed settings structure. Re-saving of Workspace may be required.

Monday, September 17, 2018 Range Volume Profile for NT8 was updated (build 1.0.4.1)
RVP - Bracket Mode
• Added an experimental Bracket Mode which includes three 'Limit By' options: by Volume, by Ticks and by Number Of Bars.

see description | download

NinjaTrader 7 Add-ons

Reconstructed Tape NT7

Time & Sales window with the original size reconstitution of underlying initial market orders and many other features. Fast and flickering-free.

$132.00
see description | download

NinjaTrader 7 Add-ons

Volume Nodes Detector NT7

Versatile unique tool that works as Volume Profile, Floating Volume Footprint and Volume Painter, and thus as Clusters Detector.

$199.00
see description | download

NinjaTrader 7 Add-ons

DOM Bricks Catcher NT7

Catches big orders in the Order Book (aka Depth Of Marker or Level II) and puts them on the price chart. Now you have never miss out any flickering big size on the DOM.

$45.00
see description | download

NinjaTrader 7 Add-ons

Inter-Sessional Average NT7

The tool of a contextual analysis of any specified metric like the volume, the bar ranges, some index, etc. It makes possible to compare the metric in relation to its average over the sessions (days).

$39.00
see description | download

NinjaTrader 7 Add-ons

Remaining Daily Range NT7

Plots price levels of where average daily or session range will be achieved in the current session. Bundled with dtFixedMovements indicator.

$49.00
see description | download

NinjaTrader 7 Add-ons

Universal Bands NT7

Pleiad of different kind of "averages" and bands which can be combined with each other in a variety of combinations. Cumulative averages, averages of fixed period, VWAP, developing POC & VPOC, developing bar- and volume-based Value Area, linear regression, percent envelopes, Keltner channels, Bollinger bands, etc.

$39.00
see description | download

NinjaTrader 7 Add-ons

Range Volume Profile NT7

Most flexible Volume Profiling tool for NinjaTrader. Plots custom and/or composite Volume Profiles, Tick Profiles and Average Trade Size histograms for user-defined period.

$159.00
see description | download

NinjaTrader 7 Add-ons

Buy-Sell Pressure NT7

Simple volume- or tick-based delta per bar.

$39.00
1
×
please wait…